Modeling of Moving Sound Sources Based on Array Measurements
By (author) Fanyu Meng
Paperback (Published)
(September 2018)
ISBN: 9783832547592
5.71 x 8.27 inches
Price: $66.00
In stock
When auralizing moving sound sources in Virtual Reality (VR) environments, the two main input parameters are the location and radiated signal of the source. An array measurement-based model is developed to characterize moving sound sources regarding the two parameters in this thesis. This model utilizes beamforming, i.e. delay and sum beamforming (DSB) and compressive beamforming (CB) to obtain the locations and signals of moving sound sources. A spiral and a pseudorandom microphone array are designed for DSB and CB, respectively, to yield good localization ability and meet the requirement of CB. The de-Dopplerization technique is incorporated in the time-domain DSB to address moving source problems. Time-domain transfer functions (TDTFs) are calculated in terms of the spatial locations within the steering window of the moving source. TDTFs then form the sensing matrix of CB, thus allowing CB to solve moving source problem. DSB and CB are further extended to localize moving sound sources, and the reconstructed signals from the beamforming outputs are investigated to obtain the source signals. Moreover, localization and signal reconstruction are evaluated through varying parameters in the beamforming procedures, i.e. steering position, steering window length and source speed for a moving periodic signal using DSB, and regularization parameter, signal to noise ratio (SNR), steering window length, source speed, array to source motion trajectory and mismatch for a moving engine signal using CB. The parameter studies show guidelines of parameter selection based on the given situations in this thesis for modeling moving source using beamforming. Both algorithms are able to reconstruct the moving signals in the given scenarios. Although CB outperforms DSB in terms of signal reconstruction under particular conditions, the localization abilities of the two algorithms are quite similar. The practicability of the model has been applied on pass-by measurements of a moving loudspeaker using the designed arrays, and the results can match the conclusions drawn above from simulations. Finally, a framework on how to apply the model for moving source auralization is proposed.
- By (author) Fanyu Meng
Other Titles in this Series
Spatial audio reproduction for hearing aid research
: System design, evaluation and application
Volume 36
Similar Books
![Book cover: Transitive Media [Philosophy]](https://isd.stisonbooks.com/images/books/native/9781804132326.jpg?asset_id=66970)
Care in an Era of New Technologies and Artificial Intelligence
Relationships in a Connected World
Volume 14
Buchblogs zwischen Passion und Profession
Zur Diskursivierung digitaler literaturbezogener Anschlusskommunikation als Arbeit
Die Einführung ins richtige Handeln in der Arithmetik (Madḫal ar-rašad ilā ʿilm al-ʿadad) von al-Qalaṣādī (st. 1486)
Bearbeitung und Einordnung in die maġribinische Mathematikgeschichte
Volume 19
Digitale Medien und Religionsunterricht
Ein domänenspezifischer Beitrag zu einer kritischen Medienbildung unter Berücksichtigung medien-, bildungs- und lerntheoretischer Perspektiven
Ein Glucksritter als Wegbereiter der Motorisierung
Der Basler Kaufmann Eduard Burckhardt (1847-1897)
Partizipative Produktentwicklung in der Modeindustrie
Methoden, Vorgehensmodelle und ihre Anwendung in der Wertschöpfung smarter Outdoorbekleidung
Heterarchical Production Planning and Control Architectures in the Context of Industry 4.0
Complexity-based Selection and Guidance for Implementation
Volume 67
Proceedings of the 7th Symposium of the Hellenic Society for Archaeometry
Archaeology Archaeometry: 30 Years Later
I disegni e i discorsi di Giovanni Antonio Nigrone vol. I
fontanaro e ingegniero de acqua (1585-1609 ca.)
Volume 481
I disegni e i discorsi di Giovanni Antonio Nigrone vol. II
Fontanaro e ingegniero de acqua (1585-1609 ca.)
Volume 497
