Oil Droplet Impact Dynamics in Aero-Engine Bearing Chambers-Correlations derived from Direct Numerical Simulations
By (author) Davide Peduto
Paperback (Published)
(June 2015)
ISBN: 9783832540012
6.65 x 9.45 inches
Price: $58.00
Out of stock
Bearing Chambers in Aero-Engines are located near the rolling-element type of bearings which support the shafts and accomodate the resulting thrust loads. One of the main task of the bearing chambers is, beside an efficient scavenging of the lubricating oil, the cooling of the hot compartments. A very complex two-phase air-oil flow takes usually place in these bearing chambers consisting of oil droplet-laden air flows and shear-driven liquid wall films. The interaction of the droplets with the wall films is significantly influencing the wall heat transfer and the cooling performance of these systems. For this reason, a detailed characterization and modelling of the mass and momentum exchange between droplets and wall films for the unique impingement parameter range in bearing chambers is inevitable. This scientific report investigates the oil droplet impact dynamics for typical impingement regimes relevant to aero-engine bearing chambers. The application of a Direct Numerical Simulation (DNS) technique based on the Volume-of-Fluid (VOF) method and coupled with a gradient-based adaptive mesh refinement (AMR) technique allowed to characterize the drop impact dynamics during various single micro- and millimeter drop impacts onto thin and thick films. With the help of a special numerical treatment, a self-perturbing mechanism is installed that leads to the correct resolution of the crown disintegration process. The numerical methodology was thoroughly validated using the experimental results of millimeter sized drop impacts onto deep liquid pools. These results were developed with an enhanced back-illuminated high-speed imaging and Particle Tracking Velocimetry (PTV) technique. New insights into the cavity penetration, the crown’s breakup dynamics and the secondary droplet characteristics following a single drop impact have been developed with the help of the isolated variation of different parameters of influence. Particularly the influence of the Froude number, the impingement angle, and the cavity-wall interaction delivered results to date not reported in scientific literature. Beside the advances in fundamental physics describing the drop impact dynamics with the help of the numerical and experimental results, a set of correlations could also be derived. From these correlations, a drop-film interaction model was formulated that is suitable for the parameter range found in bearing chambers.
- By (author) Davide Peduto
Similar Books
Care in an Era of New Technologies and Artificial Intelligence
Relationships in a Connected World
Volume 14
Buchblogs zwischen Passion und Profession
Zur Diskursivierung digitaler literaturbezogener Anschlusskommunikation als Arbeit
Volume 5
Proceedings of the 7th Symposium of the Hellenic Society for Archaeometry
Archaeology Archaeometry: 30 Years Later
Die Einfuhrung ins richtige Handeln in der Arithmetik (Madhal ar-rasad ila ‘ilm al-‘adad) von al-Qalasadi (st. 1486)
Bearbeitung und Einordnung in die magribinische Mathematikgeschichte
Volume 19
I disegni e i discorsi di Giovanni Antonio Nigrone vol. I
fontanaro e ingegniero de acqua (1585-1609 ca.)
Volume 481
I disegni e i discorsi di Giovanni Antonio Nigrone vol. II
Fontanaro e ingegniero de acqua (1585-1609 ca.)
Volume 497
Analysing Data from Capacitive Floor Sensors for Human Gait Assessment Using Artificial Neural Networks
Volume 5
Modeling Methods for Process Induced Distortions of CFRP-Parts produced in the Prepreg-Autoclave-Process
Volume 20
Performance Management in Humanitarian Logistics
Development of a Process-driven and IT-supported Performance Measurement System
Volume 66
Supporting Operational and Real-time Planning Tasks of Road Freight Transport with Machine Learning
Guiding the Implementation of Machine Learning Algorithms
Volume 69
